Guangxi Chentian Metal Products Co., Ltd

Model Number: ZXL008 Brand Name: Baosteel, TISCO Key Specifications/Special Features: DescriptionHot work, chromium-molybdenum type tool steel that exhibits excellent resistance to softening at elevated temperatureThis grade is very resistant to thermal fatigue cracking (heat cracking) and can be water cooled in serviceApplicationsIt is recommended for difficult hot work tooling applications such as hot punches, forging dies, hot shear blades, extrusion toolingSoft annealing
Heat to 780-810°C, cool slowly in furnace
This will produce a maximum Brinell hardness of 229
Stress relieving
Stress relieving to remove machining stresses should be carried out by heating to 600-650°C, holding for one hour at heat, followed by air cooling
This operation is performed to reduce distortion during heat treatment
Hardness after quenching is 44-54 HRC
Hardening
Harden from temperature of 1010-1050°C followed by air, oil quenching or warm bath quenching 450-450°C
Forging
Hot forming temperature: 1100-900°C
Machinability
90-95 of a 1% carbon steel
Corrosion resistance
Corrosion resistance of this alloy is better than that of plain carbon steels
However it will rust unless given protective treatment

Specifications:
Grade: mat no 1.2365
Standards: DIN, AISI, GB, EN
Length: 2000-6000mm
Width: 600-2000mm
Thickness: 0.3-200mm
Certification: ISO
Technical treatments: cold-rolled and hot rolled

Packing and delivery
Packing: standard export seaworthy packing or as customers requirements
Delivery: 7-20 days after received deposit of T/T